Cadmium Molybdate SDS of Manufacturers Exporters

Anmol Chemicals is the pioneer manufacturers of Cadmium Molybdate, Pharmaceutical Excipients Chemicals in India. We offer Halal and Kosher Cadmium Molybdate made in an ISO9001, ISO22000 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Cadmium Molybdate is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Cadmium Molybdate SDS of Manufacturers

Molybdic Acid Cadmium Salt or Cadmium Molybdate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

Product Name & Other Names: Molybdic Acid Cadmium Salt or Cadmium Molybdate
CAS No.: 13972-68-4
EINECS EC Number: 237-752-6
Chemical Formula: CdMoO4
Molecular Weight: 272.35
Relevant uses and uses advised against (if any): Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, oral Category 4, H302
Acute toxicity, Inhalation Category 4,H312
Acute toxicity, Dermal Category 4, H332
Carcinogenicity Category 1A, 1B, H350
Chronic aquatic toxicity (Category 1), H410

Hazard statements:
H302: Harmful if swallowed.
H312: Harmful in contact with skin.
H332: Harmful if inhaled.
H350: May cause cancer.
H410: Very toxic to aquatic life with long lasting effects.

Precautionary statements:
P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P312 + P330: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
P302 + P352 + P312: IF ON SKIN: Wash with plenty of water. Call a POISON CENTER/doctor if you feel unwell.
P304+P340: IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
P405: Store locked up.
P501: Dispose of contents/container to authorized agents only.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
Xn Harmful
N Dangerous for the environment
Risk Phrase:
R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R45 May cause cancer.
R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Product Name & Other Names: Molybdic Acid Cadmium Salt or Cadmium Molybdate
CAS No.: 13972-68-4
EINECS EC Number: 237-752-6

Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin: Immediately flush skin with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and shoes before reuse. Get medical attention if irritation develops.
Eyes: Immediately flush eyes with plenty of water for 15 minutes, occasionally lifting upper and lower eyelids. Hold eyelids apart during irrigation. Get medical attention.
Inhalation: Remove person to fresh air. If breathing is difficult, give oxygen. If not breathing administer artificial respiration. Get medical attention.

Flash Point: N/A
Fire/Explosion: Not considered to be a fire and explosion hazard.
Extinguishing Medium: Water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture: Cadmium oxides, Molybdenum oxides & fumes may evolve.
Fire Fighting Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use suitable protective equipment for surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and acids.

Exposure Limits: TWA 0.010 mg/m3, USA, ACGIH Threshold Limit Values
Engineering Controls: Use adequate exhaust ventilation to keep airborne concentrations below the allowable exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Physical State: Solid powder.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Not available.
Viscosity: Not available.

Chemical Stability: Stable under normal temperatures and pressures.
Incompatibility (Materials to Avoid): Oxidizing agents, Acids.
Conditions to Avoid: Incompatible materials, excessive heat.
Hazardous Decomposition Products: Cadmium oxides, Molybdenum oxides & fumes may evolve.
Hazardous Polymerization: Will not occur.

Toxicity to Animals: No data available.
Carcinogenicity: IARC: 1 - Group 1: Carcinogenic to humans.
Mutagenic Effects: No data available.
Reproductive Effects: No data available.
Specific target organ toxicity: May cause damage to organs through prolonged or repeated exposure.

Toxicity to fish: No data available.
Toxicity to daphnia and other aquatic invertebrates: No data available.
Ecotoxicity: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Toxicity to fish: No information found.
Results of PBT and vPvB assessment: Not available.

Dispose of in accordance with all applicable local, state, and federal regulations at an approved waste disposal facility.

DOT USA, TDG Canada & ADR/RID Europe:
UN-No UN 2570
Proper Shipping Name: Cadmium compounds (Cadmium molybdate).
Hazard Class 6.1, Packing Group III.
IMDG/IMO
UN-No UN 2570
Proper Shipping Name: Cadmium compounds (Cadmium molybdate).
Hazard Class 6.1, Packing Group III.
IATA:
UN-No UN 2570
Proper Shipping Name: Cadmium compounds (Cadmium molybdate).
Hazard Class 6.1, Packing Group III.

USA:
SARA 311/312: Hazardous Categorization: Acute Health Hazard; Chronic Health Hazard. See section 2.

European Labeling in Accordance with EC Directives:
H302: Harmful if swallowed.
H312: Harmful in contact with skin.
H332: Harmful if inhaled.
H350: May cause cancer.
H410: Very toxic to aquatic life with long lasting effects.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This Cadmium Molybdate SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

Cadmium Molybdate Manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.